Martin MAC Quantum Profile

Description

Experience unparalleled brightness with our premium LED profile fixture. Our fast and smooth CMY colour mixing system delivers crisp white light, gobo projections, and stunning mid-air displays.

With the introduction of our innovative Animotion™ FX system, you can now achieve breathtaking beam animations like never before. Say goodbye to old 700/800 W discharge lamps and embrace the future of lighting technology with our cutting-edge LED solution

FEATURES

Flat field, crisp image, high contrast
Full feature set including CMY colour mixing and 1:3 zoom
Very low weight and compact design
Super high-speed movements and effects
Consistent photometric performance via the latest LED technology

PHYSICAL
Length: 452 mm (17.8 in.)
Width: 431 mm (17.0 in.) across yoke
Height:
642 mm (25.3 in.) head straight up
648 mm (25.5 in.) maximum

DYNAMIC EFFECTS
Electronic dimming: Four dimming curve options
Colour mixing: CMY, independently variable 0 – 100%
Colour wheel: 6 colour filters plus open

Beam effects: Rotating three-facet prism
Rotating gobo wheel: 6 interchangeable gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 10 gobos plus open, wheel indexing, rotation and shake

Iris: 0 – 100%, pulse effects
Zoom: Motorized
Focus: Motorized, with zoom-focus tracking
Shutter effect: Electronic, with variable speed regular and random strobe

Pan: 540°
Tilt: 268°
Pan and tilt speed: Adjustable via onboard control panel and DMX

CONTROL AND PROGRAMMING
Control systems: DMX
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of dimming, gobo indexing, zoom, focus, pan and tilt

Setting and addressing: Control panel with backlit graphic display
DMX channels: 19/27
DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20
Transceiver: RS-485

Fixture software update: Direct using USB memory stick or via DMX link using Martin USB Duo™ DMX Interface Box

OPTICS
Zoom range: 12° – 36° (1:3)
Light source: 475 W LED engine
LED refresh rate: 3000 Hz
Default colour temperature: 6000 K
Output: 12,700 lumens

CONSTRUCTION
Housing: High-impact flame-retardant thermoplastic
Colour: Black
Protection rating: IP20

INSTALLATION
Mounting points: 4 pairs of quarter-turn locks
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m
Minimum distance to illuminated surfaces: 2.0 m

CONNECTIONS
AC power input: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR

ELECTRICAL
AC power: 120-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current: 10.3 A
Typical power consumption, all effects static, zero light output: Approx. 50 W
Maximum total power consumption: 750 W

TYPICAL POWER AND CURRENT
120 V, 60 Hz: 4.8 A, 576 W, PF 0.999
208 V, 60 Hz: 2.8 A, 568 W, PF 0.991
230 V, 50 Hz: 2.5 A, 565 W, PF 0.988
240 V, 50 Hz: 2.4 A, 565 W, PF 0.988

Measurements were made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

THERMAL
Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 5° C
Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.

APPROVALS
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA C22.2 No. E598-2-17 (CSA E60598-1)
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241