Martin Mac Aura wash

Add To Quote


Introducing the MAC Aura, a versatile and award-winning wash light that has become a go-to luminaire for lighting designers worldwide. Its innovative design features a combination of multicolour beam LEDs and a backlight LED array, making it the first LED moving head wash light to eliminate the synthetic look commonly associated with LED wash lights.

This single-lens wash light provides a fully premixed colour and a broad colour palette, with RGBW colour mixing, enabling lighting designers to create stunning and unique effects. The MAC Aura also features the eye-catching Aura Effects™, further enhancing its creative capabilities. Whether you’re a professional lighting designer or a passionate hobbyist, the MAC Aura is the perfect choice to take your lighting designs to the next level.


Length: 302 mm (11.9 in.) across yoke
Width: 302 mm (11.9 in.) across yoke
Height: 360 mm (14.2 in.), head straight up
Weight: 5.6 kg (12.4 lbs.) without accessories


Beam colour mixing: RGBW
Aura (secondary lens array illumination) colour mixing: RGB
Beam colour temperature control: CTO, variable 10 000 – 2500 K
Beam and aura electronic ‘colour wheel’ effect: 33 LEE-referenced colours plus white, variable-speed colour-wheel rotation effect and random colour
Beam and aura-independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
Electronic dimming: Independent beam and aura, four dimming curve options
Pan: 540°
Tilt: 232°
Pan and tilt speed: Adjustable via onboard control panel and DMX


Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
Macro programs selectable via DMX: Synchronized beam and aura effects
Control: DMX
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of pan & tilt
DMX channels: 14/25
Setting and addressing: Control panel with backlit graphic display
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: RS-485
Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box


Zoom range: 11° – 58°
Peak angle: One-tenth
Light source: 19x 10W RGBW LED Array System
Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
LED refresh rate: Beam 1220 Hz, Aura 4395 Hz
Colour Modes: Calibrated Mode and Raw Mode
Binning: Tight color and flux binning
Calibration: Full Gamut Color Calibration
*Figure obtained under manufacturer´s test conditions


Total output: 3850 lumens (zoom at maximum)
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.


Housing: High-impact flame-retardant thermoplastic
Colour: Black
Protection rating: IP20


Mounting points: One M12 threaded hole for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 100 mm (4.0 in.)
Minimum distance to illuminated surfaces: 200 mm (7.9 in.)


AC power input: Neutrik PowerCon
AC power throughput: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR


AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Main fuse: 5 AT (slow blow)
Typical power consumption, all effects static, zero light output: <15 W
Maximum total power consumption: 260 W
100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.


Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Total heat dissipation (calculated, +/- 10%): 880 BTU/hr


There are no reviews yet.

Be the first to review “Martin Mac Aura wash”

Your email address will not be published. Required fields are marked *